QUALITY CONTROL

We guarantee the quality of our products through the application of monitoring throughout the manufacturing process:

1. Acceptance testing

  • of raw materials on specification sheet
  • of tools with dimension checking against drawings

    1

2. In-process inspection

  • of physicochemical parameters by the quality control laboratory (dry extract, density, viscosity, pH, etc.)
  • of dip-coating parameters by operators (speed, time, temperature, etc.)

3. Final inspection of finished product:

  • Glove
  • Technical part
  • Custom baths

 

GLOVE (personal protective equipment - PPE)

Two types of inspection may be performed according to customer requirements: standard PIERCAN inspection, or reinforced specifications-based inspection.

The following inspections are performed

1. 100% visual inspection

3

2. Dimensional inspection

4

3. Control of standard and specific mechanical properties (resistance, rupture, elongation, puncture, hardness, tearing, etc.) as per applicable standards

4. 100% tightness test for gloves (EN 421 standard)

7

 Marking is applied to the glove and serves to ensure the required traceability, from the inspector to the raw materials used in the process.

8

All inspections performed lead to the final packaging of the gloves in black anti-UV sleeves.

The stringency of these inspections constitutes a genuine guarantee of user safety.

 

TECHNICAL PART

Two types of inspection may be performed according to customer requirements: standard PIERCAN inspection, or drawing-based inspection.

The following inspections are performed:

- 100% visual inspection

10

- dimensional inspections

11

 

CUSTOM BATHS

Custom baths can be created from a PIERCAN formula, or from the customer's own formula. The physicochemical parameters are tested by the laboratory.